... and safety key is there and battery if full and we just got it and did not work we switched it and got another same one but still is same
Answers (1)
Check the fuse, could be blown if the motor used more than what it was supposed to do, it can be checked with a multi-meter on the diode setting, if it beeps then the fuse is good, then check the multi-meter into the battery and the slots were the fuse was at with the motor on, both should beep, if it doesn't beep then its either one of the wires going to the motor and back to the battery/switch, or the motor itself, to check the motor use the multi-meter and have one prong on one side, and the other prong on the other, luckily if it beeps then its a case where you have to replace the wires or switch.