So my camera on my iPhone isn't working. It started since I turned on the restrictions than I turned it back off like it was. The camera wasn't working on my phone and I couldn't fix it. It said "Sorry, but your device is not capable of making video calls because it does not have any accessible cameras." It showed me thing when I tried video calling my mother on the app Tango. Someone please tell me how to fix this!
Answers (2)
iPhone 6 Camera Not Working Case Analysis
Tap “Camera” icon and enter into camera mode, the rear camera cannot be activated. Switch to front camera. It works normally.
Let’s replace with a new rear camera at the beginning. Disassemble the phone, detach battery and then remove the display assembly. Take down the rear camera and replace with a new rear camera.
Get the display assembly buckled and connect the battery. Then power on and test. The rear camera still cannot be activated.
Remove the display assembly and take down the rear camera. Measure the rear camera power supply voltage. The power supply voltage value is normal.
Then, measure the resistance between rear camera connector and grounding. The resistance value of pin 30 is 303, which is abnormal. The reference resistance value of pin 30 should be 537 or so.
Pin 30 works as the activating signal of the flashlight. It is also connected with pin E3 of flashlight IC U1602 via FL2322 and C2300.
Take down the logic board. Then attach the logic board to PCB Holder. Then take down capacitor C2300 with Hot Air Gun at 320℃. Then measure the resistance between pin 30 and grounding again. The resistance value of pin 30 is 300, which is abnormal.
Then we can draw the conclusion that IC U1602 broke down.
I did it won't work